Furuno FCR-2107 Series Operator's Manual page 546

FURUNO
Rotation
2.2 Transceiver
Frequency
Output power
Pulselength, PL, PRR and range
Pulselength
PL (µs)
PRF (Hz)
Range
scale(nm)
*: 2200 Hz with ARPA on 32 nm range **: 450 Hz on 96 nm range
IF
Noise figure
Duplexer
2.3 Display-related specifications
Minimum range
Range discrimination
Range scales (nm), range ring interval
Range accuracy
Bearing discrimination
Bearing accuracy
Radar map
ARPA/ATA
AIS
Max. no of targets
Safety msg input
Data display
FCR-2117/2127/2817/2827: 24 rpm or 42 rpm
FCR-2137S/2837S: 21 rpm (50 Hz)/26 rpm (60 Hz)/45 rpm (High
Speed Craft)
FCR-2827W: 24 rpm
FCR-2837SW: 21 rpm (50 Hz)/26 rpm (60 Hz)
X-band: 9410 MHz ±30 MHz
S-band: 3050 MHz ±30 MHz
FCR-2117/2817: 12 kW
FCR-2137S/2837S/2837SW: 30 kW
Unwanted emissions comply with ITU-R RR.
S1 S2
0.07 0.15
3000* 3000*
0.125, 0.5, 0.75,
1.5, 3
0.25, 0.5,
0.75, 1.5
60 MHz
X-band: 6 dB, S-band: 4 dB
Ferrite circulator with diode limiter:
FCR-2117/2127/2137S/2817/2827/2837S
Ferrite circulator with TR limiter:
FCR-2827W/2837SW
20 m w/raw video + 0-2 m w/digitize error
20 m w/raw video + 0-6 m w/digitize error
0.125 (.025), 0.25 (0.05), 0.5 (0.1), 0.75 (0.25), 1.5 (0.25), 3
(0.5), 6 (1), 12 (2), 24 (4), 48 (8), 96 (16)
Within 1% or 10 m, whichever is greater
1.5° (XN20AF), 1.2° (XN24AF), 2.5° (SN30AF), 2.0° (SN36AF)
±1°
Route, coastline, buoy, etc. 20,000 pts. in radar mode, 6,000
pts. in chart mode (using IC card)
Acquisition: 0.1-32 nm, 100 targets (auto and/or manual,
selectable from menu)
Vector time: 7 times (OFF to 30 m)
Time from acquisition to display: within 60 s at 24 rpm
Trail maneuver available
Complies with IMO SN CIRC. 217, IEC60936-5
200 targets; Safety messages: 100
Address-specific, all ships
Ship's name, call sign, L/L, range, heading, course, speed,
CPA/TCPA, BCR/BCT, ROT, IMO no., MMSI no, etc.
SP - 2
FCR-2127/2827: 25 kW
M1 M2
0.3 0.5
1500 1000
0.75, 1.5, 3, 6, 12,
3, 6 24
M3 L
0.7 1.2
1000 600**
3, 6, 12, 6, 12, 24,
24 48, 96
E3559S01B-M