Furuno FCR-2107 Series Operator's Manual page 146

5. AIS Operation
Basic AIS target data
From the control unit w/keyboard
1. Use the trackball to place the cursor on the AIS target symbol you want to know its data.
2. Press the TARGET DATA key.
By trackball
Use the trackball to place the cursor on an AIS target symbol then push the scrollwheel. The selected target is
marked with a broken square and AIS data is shown in the AIS data box when the target is correctly selected. Ship
name is shown near the target. If ship name is not available, MMSI no. appears.
A ASSOC
Association data display, basic data
5-20