Alerts Description - Furuno FCR-2107 Series Operator's Manual

1.12

Alerts Description

When error is detected, the appropriate alert indication appears (in red or yellow) and the audio alert sounds. Silence
the audio alert with the ALARM ACK key or select the ALARM ACK box then push the left button. The error
indication remains on the display until the reason for the alert is removed.
Message no.
100 RadOv No Headline
101 RadOv No Azimuth
102 RadOv No Trigger
103 RadOv No Video
108 Watch Alarm
705 Gyro Error
708 Log Error
709 Dual-Axis Log (BT) Error
710 Echo Sounder Error
711 Wind Sensor Error
712 Position Eq Error
738 Datum mismatch
764 LAN fail for LAN-adapter
771 LAN fail for Radar
860 Safety Contour
874 Anchor Watch
Refer to section 4.15 TT Alerts for TT alerts, section 5.17 AIS Alerts for AIS alerts.
Outputting alarm signal
Four ports are provided from which to output alarm signals to external equipment. Select the port and alarm signals
to contact output. For more information, see the installation manual.
Alerts description
Message Alert category
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
No heading signal
No antenna rotation signal
No trigger signal
No video signal
Watch 0:00 (Watch appears and time count freezes
at 0:00).
Gyro data is not received correctly.
Log data is not received correctly.
Dual axis log data is not received correctly.
Echo sounder data is not received correctly.
Wind sensor data is not received correctly.
Position equipment data is not received correctly.
Position sensor outputs position another datum as
set in Installation parameters.
Unexpected LAN error. Maybe LAN cable or HUB
broken/disconnected.
Unexpected LAN error. Maybe LAN cable
broken/disconnected.
Alarm Depth is less than the safety contour.
Ship has drifted more than a threshold value.
1. Operational Overview
Description
1-17