Furuno FCR-2107 Series Operator's Manual page 547

FURUNO
3. ECDIS
3.1 Display contents
Chart materials
Own ship display
Other ship display
Other data
3.2 Other display features
Cursor
One-touch restore
Chart data
3.3 User interface
Position fixing
Navigation planning
Route monitoring
User chart
MOB (Man Overboard): Position, etc. at time of man overboard are recorded and MOB
4. I/O
4.1 Heading data
4.2 Speed signal
4.3 AIS interface
4.4 Input sentences
4.5 Output sentences
IHO/IMO S57 edition-3 ENC vectorized material
Own ship mark and numeral indication or lat/lon, speed and
course
ARPA target mark and numerical data
(range and bearing from own ship, course, speed, CPA,
TCPA)
Route, waypoint, nav line, electronic chart, various alarms
Chart zoom in and zoom out
EBL, VRM, parallel cursor
One-touch restore of standard mode
Select to show applicable data
- Navigation by position from external EPFS
- Dead reckoning by gyro, log
- Kalman filter determines best position from gyro data and
EPFS
- Planning by Rhumb line, Great circle
- Route creation
- Route data may be transferred to radar
- Route data may be transferred from ECDIS
- Off-track display
- Waypoint arrival alarm
- Shallow depth alarm
User chart creation (Max. 2000 lines, 1000 symbols), with
overlay
mark is displayed on the screen.
Built-in interface (option) for sync signal (20-135 VAC, 50-400
Hz), or stepper signal (20-100 VDC), any polarity, for
gyrocompass, GPS compass SC-60/120 by IEC 61162-2
IEC 61162-1
IEC 61162-1, ABM, BDM, etc.
BWC, BWR, DBS, DBT, DPT, DTM, GGA, GLL, HDT, RMA,
RMB, RMC, RTE, VBW, VDR, VHW, VWR, VTG, VWT, MTW,
MWV, WPL, ZDA (IEC 61162-1)
TLL, RSD, TTM, AAM (IEC 61162-1)
SP - 3
E3559S01B-M