Using Senc Convert Window To Initiate Senc Conversion - Furuno FCR-2107 Series Operator's Manual

7.3.6

Using SENC convert window to initiate SENC conversion

Normally automatic SENC conversion is chosen and there is no need to initiate SENC conversions from the SENC
convert window. If you do not use the automatic SENC conversion, you need to manually initiate SENC conversion.
Another case in which you need to manually initiate SENC conversion is if you upgraded or reloaded the chart radar
software from the chart radar software CD ROM.
To initiate SENC conversions manually, do the following:
1. Spin the scrollwheel to display Menu/Info/Chart Menu in the guidance area then
push the right button.
2. Choose SENC Convert from the menu then push the scrollwheel. The SENC
Convert window appears.
3. Use the Cells button to choose an individual chart or use the Groups button to
choose a group of charts.
4. Click the Convert button to initiate the SENC conversion of the charts.
Note that Convert only converts those charts which are not currently converted
into the SENC format. If your chosen chart or all members of your chosen group
are already in the SENC format, the Conversion list remains empty. If all or some
charts are not yet in the SENC format, they are added to the Conversion list (see
the example below). If, for some reason, you need to force SENC conversion of an
already converted chart, refer to section 7.14 Other Features of Vector Charts.
Note 1: You can remove charts from the conversion list at any time. Use the cursor to
highlight the charts to remove then click the Select button. Finally, click the Cancel
Conv. button to remove chosen charts from the SENC conversion queue.
Note 2: You can view the results of the finished SENC conversions at any time. Click
the Conv. History button to view the conversion log.
7. Vector Chart Material
7-21