Furuno FCR-2107 Series Operator's Manual page 160

6. ECDIS Overview
Information in route sidebar
The following information is shown in the route sidebar:
Information from route monitoring:
Route: Name of monitored route
• Plan Speed: Planned speed to approach "To WPT".
• Plan: Planned course between previous WPT and "To
WPT".
• Route: Calculated set course to follow the monitored
route, including off track, drift and gyro error
compensation.
• Ch LIM: Planned width of channel to approach "To
WPT".
• Off track: Perpendicular distance the ship is from the
intended track.
• To WPT: The waypoint which the ship is approaching.
• Dist WOP (Wheel Over Point): Distance to the point
where rudder order for course change at "To WPT"
will be given.
• Time: Time to go to WOP (dd:hh:mm:ss).
• Turn RAD: Planned turning radius at "To WPT".
• Turn rate: Calculated rate of turn which is based on
current speed and planned turning radius.
• Next WPT: The WPT following the "To WPT".
• Next: Planned course between "To WPT" and "Next
WPT".
The following information is calculated from data of
positioning sensors and from route monitoring data:
• Route
• Off track
• Dist WOP
• Time
• Next
6-6