Changing Other Data Of Point, Symbol, Line Or Tidal; Deleting A Point, Symbol, Line Or Tidal - Furuno FCR-2107 Series Operator's Manual

12. User Chart Control
Choosing a point, symbol, line or tidal to modify
In this manual the term "user chart object" refers to any of point, symbol, line or tidal. The procedure for modifying
a user chart object is common to all user chart objects. To choose the user chart object to modify, open the
appropriate user chart object page. In the Current field, the number indicates user chart object which is currently
chosen for modification. If you want to select a different number, do one of the following:
•
Enter desired number of user chart object in the Current box. To change the number place the cursor in the
Current box, spin the scrollwheel to choose number then push the scrollwheel. Click the OK button.
•
Use the Info feature to find area. Place the cursor on the desired corner point of the area on the electronic chart
then push the scrollwheel.
Changing position of a point, symbol, line or tidal
You can change the position of a user chart object two ways:
•
Enter latitude and longitude in the Position field.
•
Drag and drop a user chart object with the left button.
Entering latitude and longitude in position field
1. Open desired user chart object page.
2. Choose desired user chart object.
3. Enter co-ordinates in the Position field. To change a co-ordinate, place the cursor to the right of the digit to
change, in the appropriate box, push the left button, spin the scrollwheel to choose desired value then push the
scrollwheel. Note that lines have starting and ending point position fields.
Dragging and dropping a user chart object to new WPT position
1. Open desired user chart object page.
2. Place the cursor on the user chart object in the electronic chart area and press and hold down the left button
while rolling the trackball to position the user chart object.
3. Keep the button pressed down while you move the cursor and release it when the cursor is at the position
desired.
12.7.2

Changing other data of point, symbol, line or tidal

To change other data of a user chart object, such as name, symbol, element type, do the following:
1. Choose desired user chart object. For more information, see "Choosing a point, symbol, line or tidal to modify"
on this page.
2. Place the cursor in desired edit box then use the scrollwheel to enter data. Push the scrollwheel to confirm.
12.7.3

Deleting a point, symbol, line or tidal

To delete a user chart object, do the following:
1. Open desired user chart object page.
2. Choose user chart object to delete.
3. Click the Delete button in the chosen user chart object page.
12-16