Choosing A Picture Setup Option; User-Programmable Picture Setups - Furuno FCR-2107 Series Operator's Manual

2. Radar Operation
2.22.1

Choosing a picture setup option

You can select a picture setup option as follows:
1. Use the trackball to select the PICTURE box at the left side of the screen.
PICTURE box example
2. Push the left button to select picture setup option desired.
2.22.2

User-programmable picture setups

Four user-programmable picture setups are provided and they are labeled PICTURE 1 – PICTURE 4 in the
PICTURE box. You can program them as below.
1. Use the trackball to select the PICTURE box at the left side of the screen.
2. Push the left button to select PICTURE 1, PICTURE 2, PICTURE 3 or PICTURE 4, whichever you wish to set.
3. Push the right button to show the PICTURE menu.
PICTURE menu
4. Set the items below referring to the sections shown.
Int Reject: 2.10
Echo Stretch: 2.17
Echo Average: 2.18
Noise Rej 2.23
5. Use the trackball to select Video Contrast then push the scrollwheel.
2-32
Auto STC: 2.8
Auto Rain: 2.9
Pulse length: 2.13