Controls For Tt; Showing, Hiding Tt - Furuno FCR-2107 Series Operator's Manual

4. Tracked Target (TT) Operation
4.2

Controls for TT

Keyboard
The TT uses the keys shown below.
OFF ON
EBL
F1 F2
F3 F4
ALARM STBY
ACK TX
Trackball
With the cursor inside the effective display area, you can access TT functions by spinning the scrollwheel or
choosing appropriate TT function from the CURSOR menu.
Spin the scrollwheel to show the following indications in the guidance area to access respective TT function:
Tgt Acquire: Manually acquires a target, or displays data of the cursor-selected Tracked Target.
Tgt Cancel /L = All: Cancels tracking on cursor-selected Tracked Target.
4.3

Showing, Hiding TT

To show or hide the TT display, do the following:
1. Use the trackball to select the TT setting at the right side of the display. Push the left mouse button to show
AUTO MAN (activate) or OFF (deactivate as desired.
AUTO
MAN
4-2
BRILL A/C RAIN A/C SEA
1 2 3
HL EBL
MODE
OFF OFFSET
4 5 6
OFF CU/TM INDEX
CENTER RESET LINE
7 8 9
VECTOR VECTOR TARGET
TIME MODE LIST
0 ENTER
CANCEL
TRAILS
BRILL MARK
ACQ:
TARGET DATA:
TARGET CANCEL: Terminates tracking of tracked
Control unit RCU-020
GAIN
OFF ON
VRM
MENU ACQ
+
TARGET
DATA
RANGE
TARGET
CANCEL
Manually acquires a target.
Displays data on tracked target
chosen with the trackball.
target chosen with the trackball.