Configuring Hot Keys F1-F4 - Furuno FCR-2107 Series Operator's Manual

1.7

Configuring Hot Keys F1-F4

Hot keys F1-F4 are provided to call a desired function/menu when pushed.
You can select desired function/menu from a predefined list. To select desired function/menu for each key, do the
following:
1. Spin the scrollwheel until Menu/Info/Chart Menu appears in
the guidance area.
2. Push the left button.
3. Spin the scrollwheel to select Initial Settings then push the
scrollwheel.
4. Place the cursor on the triangle in the menu to show the
Initial Settings menu.
5. Spin the scrollwheel to select Function keys, then push the
scrollwheel. The menu shown right appears.
6. Check Enable changes.
7. Place the cursor on the box for F1, F2, F3 or F4 as
appropriate and spin the scrollwheel to select desired
function or menu.
Item
Radar, Chart Radar mode
ALARM ACK
CHART MENU
CHART DISPLAY
SENSORS
MENU
STD/PRIMARY DISPLAY
SYMBOL DISPLAY
TM/CU RESET
TOGGLE SHIP CENTER
RANGE+
RANGE-
INITIAL SETTINGS
ECDIS mode
ALARM ACK
CHART MENU
CHART DISPLAY
SENSORS
MENU
STD/PRIMARY DISPLAY
SYMBOL DISPLAY
RADAR
TM RESET
SET SHIP OFFCENTER
SET SHIP CENTERED
SCROLL
SET CHART CENTER
RANGE+
RANGE-
INITIAL SETTINGS
How to activate a menu or function with a hot key
Push the function key corresponding to the menu or function you wish to activate.
Enable changes
Content
Acknowledge alarm generated by this chart radar.
Open chart menu.
Open chart setting dialog box.
Open sensor setting dialog box.
Open main menu.
Restore standard/primary display.
Show symbol display dialog box.
Return own ship to screen center in true motion and
course-up modes.
Toggle own ship position between screen center and
cursor location.
Shrink chart.
Enlarge chart.
Show initial settings dialog box.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Show symbol display dialog box.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Move own ship position to cursor location.
Return own ship position to screen center.
Enable scrolling.
Manually set chart center.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
Same as in radar, chart radar mode.
1. Operational Overview
1-11