Furuno FCR-2107 Series Operator's Manual page 29

Changing co-ordinate polarity (available in the ECDIS mode)
By clicking co-ordinate polarity
1. Place the cursor before the co-ordinate (N, S, E, W) then push the left button.
2. Spin the scrollwheel to select desired polarity then push the scrollwheel.
By choosing polarity from drop-down menu
1. Place the cursor inside the input window.
2. Push the right button to show the following menu.
3. Select Characters then push the left button. Your screen should now look something like the one below. (In case
of longitude, E and W replace N and S.)
4. Spin the scrollwheel to select appropriate polarity then push the scrollwheel. The polarity is changed and the
window is closed.
Deleting a character
A character can be deleted from a text/numeric input field as follows:
1. Place the cursor to the right of the digit you want to delete then push the right button.
2. Delete is selected; push the scrollwheel to delete the alphanumeric selected. The character is deleted and the
window is closed.
1. Operational Overview
1-7