Control Of Predefined Imo Chart Display Settings - Furuno FCR-2107 Series Operator's Manual

7.9.7 Control of predefined IMO Chart Display Settings

There are three sets of predefined Chart Display Settings which can be used to display Charts with certain chart
features. The predefined Chart Display Settings are called as:
IMO-Base
IMO Primary (Only in Chart Radar mode)
IMO-Standard
IMO-All Other
You can find display setting in use on upper status bar. For more information, see section 6.1 ECDIS Overview.
To select desired IMO Chart Display Settings, proceed as follows:
Menu in Chart Radar mode
Open CHART DISPLAY window and move cursor over black triangle on
Chart Display window, press left mouse button.
Choose Set IMO Base, Set Imo Standard or Set IMO All Other from the
menu.
7. Vector Chart Material
Menu in ECDIS mode
7-67