Switching Hub Hub-100 - Furuno FCR-2107 Series Operator's Manual

1.15

Switching Hub HUB-100

The HUB-100 provides switching for a radar processor and chart processor unit, using an Ethernet interface
(100BASE-TX/10BASE-T). LEDs display link/activity, mode (full-duplex or half-duplex) and collision statuses. No
operation is required of the user. Simply turn on the HUB-100's AC power source to power it.
LED display
The LEDs on the top of the unit light, flash or go off according to equipment state. When the equipment is powered
all LEDs light and go off.
LED
Power
Link/Act
FDx/Col
100M
Switching Hub HUB-100
LED status and meaning
Status Meaning
Lit Equipment powered
Off Equipment off
Lit Connection with terminal normal
Off Connection with terminal disconnected
Flashing Data TX or RX
Lit Full-duplex
Off Half-duplex
Flashing Collision
Lit 100 Mbps connection
Off 10 Mbps connection
1. Operational Overview
1-19