Chart - Furuno FCR-2107 Series Operator's Manual

14. Backup Operations
•
ASCII POSITION WPNAME list of Latitude/Longitude and WP names
•
ASCII FULL, all route related information
To restore a route using ASCII data, do the following:
1. Choose the Backup and Restore command from the menu.
2. Choose desired Backup Format.
3. Choose backup drive from the Backup device field.
4. Choose desired file.
5. Click the Restore button in the Backup Device field.
14.6

Chart

Chart backup
The chart radar lets you keep a chart database identical both in the hard disk of the chart radar and the hard disk of
the backup chart radar. If you want to make a backup of chart material to backup chart radar, open the Backup &
Restore dialog box and do the following:
1. Choose file category
2. Choose Drive for backup of chart radar at Drive in the Backup Device window.
3. Click the Backup button.
Note: To copy charts between chart radar workstations, it is recommended that you use the Restore function instead
of Backup. For use of Backup, see the illustration below for when it is possible to use the Backup function.
After the backup has been completed, the hard disk content of the backup chart radar is identical with backup chart
radar. However, the backup chart radar doesn't automatically start to use possible new material. To do this, open the
Chart menu and select System>Refresh Charts after backup from the menu.
14-4
1
3
2