12.5
Choosing User Chart to use in Planning Mode
If "UChart" on the status bar is white (or black depending on color scheme in use) it means that the workstation is in
the monitoring mode user chart. To activate the planning mode and choose a user chart for the planning mode, do
the following:
1. Put the cursor on UChart in the status bar.
2. Place the cursor on the down triangle mark in the Plan box, spin the scrollwheel to choose user chart then
push the left button.
12. User Chart Control
User Chart
X
Monitor
DISP
Plan
DISP
Put cursor here and
roll scrollwheel to
select User Chart
in Planning Mode
12-7