Ais Symbols - Furuno FCR-2107 Series Operator's Manual

5. AIS Operation
5.4

AIS Symbols

When the AIS is turned on, AIS targets are marked with appropriate AIS symbol as below.
SYMBOL
A
+
+
Note 1: The equipment continues to process AIS targets when the AIS feature is switched off. When the AIS is
again turned on, symbols are immediately displayed.
Note 2: AIS symbols are momentarily erased after the screen is redrawn when the heading is changed from the
Head-up mode.
Note 3: When no AIS data is received, the message "AIS receive error" appears in the text window. Check the AIS
transponder.
5-4
STATUS
Activated All AIS symbols shown with thick line.
target Color is selectable from menu.
ROT higher Displayed for turning ship.
than preset
ROT
Dangerous Displayed when CPA/TCPA is within
target CPA/TCPA LIMIT. Red in color. Flashing
. until acknowledged.
Lost target "X" overlaid on a lost target. Red in
color. Erased after acknowledged.
Target selected Broken square is overlaid on target
for data display selected to display its data. A, B or C
shown to indicate data box location (at
the right side of the screen).
Real AtoN
Virtual AtoN
Base Station
Airborne SAR aircraft
AIS symbols
REMARKS