5. VIDEO PLOTTER OPERATION
5. For B-type radars only, select [ON] to enable the arrival alert, or [OFF] to disable
the arrival alert.
6. For all radar types, set the width (radius) of the arrival area.
7. Close the menu.
5.5.7
How to show/hide the waypoint name/number
1. Open the menu.
2. Select [8 NAVLINE•WPT].
3. Select [0 NEXT] to show the next menu page.
4. Select [3 DISP WPT NO.] or [4 DISP WPT NAME] as appropriate.
5. Select [YES] to show the waypoint name/number, or [NO] to hide the waypoint
name/number, then left-click.
6. Close the menu.
5.6
Routes
You can display one route (NAV LINE), which is either received from a connected
EPFS device (GPS, etc), or stored internally.
Note: While a route is displayed, tracks and waypoints cannot be deleted and data
cannot be loaded from an SD card.
5.6.1
How to set/edit an internal route
You can store up to 30 routes, each with up to 20 waypoints, in the internal memory.
The procedure for new routes and route editing is the same. To edit a route, you can
skip setting other items and only edit the items you wish to change.
1. Open the menu.
2. Select [8 NAVLINE•WPT].
5-16