Using The Failed Senc Conversion Window - Furuno FCR-2107 Series Operator's Manual

7. Vector Chart Material
7.3.4

Using the Failed SENC conversion window

If the system is unable to convert ENC into SENC without any error or failure, the Failed SENC conversion window
appears with a list of failed ENCs. Status of Failure means that the system completely failed to convert the ENC into
the SENC and thus the ENC cannot be used.
Status of Errors means that the system detected minor or major errors in the conversion of the ENC into the SENC.
Check the content of Conv. History and cell status to see if the error was minor or major. Major errors are indicated
as NON ENC in Conv. History. Note that the status of errors together with NON ENC in Conv History clearly
indicate that this chart is not up-to-date and thus it does not fulfil SOLAS requirements. Get the latest edition of this
chart from the publisher immediately.
"Failed" means that the system completely failed to convert the ENC into the SENC and thus the ENC cannot be
used. Failure clearly indicates that this chart is not up-to-date and thus it does not fulfil SOLAS requirements. Get
the latest edition of this chart from the publisher immediately.
The Failed SENC conversion window contains two buttons. Conv. History opens the conversion history log and
Cell Status opens the window of chosen item in the list of Failed SENC conversions window.
The Conv. History button is used to display
the conversion log. The conversion log shows
the status of converted ENCs. For further
details about the results of conversions, see
section 7.3.5 Using SENC conversion history
log.
Click the Cell Status button, and a Cell Status window appears.
Then you can click the Conv Log button to view a detailed description of errors and failures detected during SENC
conversion (see example below).
7-18