Calling Menus And Functions By The Mouse Buttons - Furuno FCR-2107 Series Operator's Manual

1.5.2

Calling menus and functions by the mouse buttons

The buttons can be used to call menus or functions on the display. At the lower right corner of the display the
guidance area displays available function or menu name, as shown in the figure below. Spin the scrollwheel to
choose menu or function desired, then push the left button, scrollwheel or right button as appropriate to access the
menu or function desired. Available menus and functions depend on cursor location
Left button
F1
F2
F3
F4
Radar and Chart Radar modes
Left button Scrollwheel
Menu Info
Range- Info
TM/CU Reset Info
Event Info
- Info
Ref Mark Info
Tgt Acquire Info
- Info
Chart Display Info
Symbol Display Info
Scrollwheel
Right button
Menu Info Chart
Using the functions shown in the figure above
as an example, the available functions with the
mouse are:
- "Menu" by pushing left button
- "Info" by pushing scrollwheel
- "Chart Menu" by pushing right button
Right button
Chart Menu Menu
Range+ Range-
Ship Offcenter -
MOB Event
Cursor Menu -
- Set Chart Center
Tgt Cancel /L=All Show Value
Nav Marks Chart Display
Primary Display Symbol Display
-
xx.xx xx.xx
Guidance area
Menu
ECDIS mode
Left button Scrollwheel
Info
Info
Info
Info
Info
Info
Info
Info
Info
1. Operational Overview
Right button
Chart Menu
Range+
Ship Offcenter
MOB
Cursor Menu
Activate Scroll
Nav Marks
Standard Display
-
1-9