Creating New Notes; Adding New Notes Record - Furuno FCR-2107 Series Operator's Manual

13. Notes
13.5

Creating New Notes

You can create and modify Notes, and this can be done in the planning mode. It is recommended to use the true
motion display mode while editing.
Select Notes
1.
Monitor
Plan
2.
To create a new Notes, do the following:
1. Place the cursor on Notes in the status bar then click the Plan button to show the Plan Notes dialog box. If you
have not already chosen Notes, the plan Notes menu also appears. If the menu is not displayed, click the triangle
mark in the dialog box. Choose Create from the menu then push the scrollwheel.
2. Enter a name for the user chart, spinning the scrollwheel to choose character then pushing the scrollwheel to
confirm.
3. In the Edit Record page of the Plan Notes dialog box, check "Enable changes". Roll the trackball to place the
cursor on the location desired for Notes then push the left button. In the Range box, enter the range from own
vessel at which to activate the Notes. To show text message on the screen, enter desired message in the text
window; spin the scrollwheel to choose character then push the scrollwheel to confirm.
13.5.1

Adding new Notes record

To add a new Notes record the following choices are available:
•
Using the left button.
•
Using the Add button in the Edit page.
To add a new Notes record by using the left button:
1. Open the Edit page of the Plan Notes dialog box and check Enable changes.
2. Place the cursor on the location in the chart area where you want to add a new Notes, then push the left button.
New Notes record appears at the end of file.
3. Modify Range, Position, text message, etc. as appropriate.
13-8
X
DISP
DISP
3.