Cursor Position Data - Furuno FCR-2107 Series Operator's Manual

2. Radar Operation
Category
Bearing cursor
Course, speed
CPA, TCPA
BCR, BCT
Own ship data
2.31

Cursor Position Data

Cursor position data is shown at the top right side of the radar display.
To show Time-to-go data:
1. Open the main menu followed by the Initial Settings menu.
2. Put the cursor on the triangle in the menu to show the Operation menu.
3. Put the cursor on TTG Display.
4. Select Off, Ground Speed, or Water Speed.
2-44
Markers, measurements and reference point (con't)
Item
Heading
Speed
Course over ground
Speed over ground
Own L/L
34°40.849'N
+
135°18.303'E
48.6°T
TTG
01:14 25.62 NM
Time-to-go to
cursor position
Reference point
CCRP
Drawn with CCRP at
center
Calculated with
CCRP at center
Calculated with
CCRP at center
Calculated from bow position
Data from sensor, regardless of reference point
selected
Cursor position in
latitude and longitude
Bearing and range
to cursor position
Antenna position
Drawn with antenna
position at center
Calculated with
antenna position at
center
Calculated with
antenna position at
center