19. Parameters Setup; Parameters - Furuno FCR-2107 Series Operator's Manual

19. Parameters Setup

19.1

Parameters

The Initial Settings menu in the Initial Settings dialog box contains the installation parameters, navigation
parameters and optimization parameters which define the configuration of the chart radar and operative parameters
which are either used to control steering and navigation calculation or used during route planning.
To open the Initial Settings menu, do the following:
1. Place the cursor on the text SINGLE on the lower right corner of the information area, confirm that Initial
Settings appears in the guidance area, then push the right button to open the Initial Settings dialog box.
SINGLE
xx.xx xx.xx
2.
Set time
1.
2. Place the cursor on the triangle in the Initial Settings dialog box to show the Initial Settings menu.
19-1