Choosing A Chart By Its Name; Controlling Visible Chart Features (Chart Display) - Furuno FCR-2107 Series Operator's Manual

7.9.2

Choosing a chart by its name

To activate a specific S57 chart cell onto the display, use Open Chart by Cell name menu in the Chart menu as
follows:

7.9.3 Controlling visible chart features (chart display)

The Chart Display dialog box contains several pages of chart features which you may adjust as appropriate. To
display this dialog box, spin the scrollwheel to show Chart Display/Info/Standard Display in the mouse functions
area and then push the left mouse button.
Setting value for Shallow Contour, Safety Depth, Safety Contour and Deep Contour
You can set values for Shallow Contour, Safety Depth, Safety Contour and Deep Contour. This can be done on
Chart page of Chart Display. Colours used for depth presentation on the electronic chart are controlled by setting
values for Shallow Contour, Safety Depth, Safety Contour and Deep Contour. Soundings on the electronic chart,
which are equal to or less than the value of Safety Depth, are highlighted. See below pictures for multi-colour
presentation and two-colour presentation. Selection of multi- and two-colour presentations can be done by selecting
from list box of "Depths" on Chart page of Chart Display.
MULTI-COLOUR presentation
Soundings within this
range are highlighted.
Safety
depth
Soundings within this
range are not highlighted.
In the multi-colour presentation four colours are used for depths. If input Safety contour does not exist in electronic
chart, system selects automatically next available deeper depth contour as Safety contour. For example input value is
8 m, but there is no 8 m depth contour in electronic chart, the system automatically selects next available deeper
depth contour (10 m) as Safety contour. Depth contour value of 10 m is presented as Safety Contour in this
electronic chart.
1. Spin the scrollwheel to display Menu/Info/Chart Menu in the guidance area
then push the right button.
2. Choose Open Chart by Cell name from the menu then push the scrollwheel.
3. Choose desired chart from chart list dialog then click the Open Chart button.
The chosen chart is automatically displayed in the electronic chart area.
Chart zero
Shallow contour
Safety contour (input value)
Safety contour (exisiting in ENC)
Non-navigable area
Navigable area
Deep contour
7. Vector Chart Material
7-57