Choosing Datum; Choosing User Chart To Use In Monitoring Mode - Furuno FCR-2107 Series Operator's Manual

12. User Chart Control
12.3

Choosing Datum

Selection of datum is very important, especially if you manually enter latitude-longitude positions from the control
panel or keyboard or if you use digitizer. If you only use the cursor to add and to modify waypoint locations, then
you could use any datum, although it is recommended to use native datum of the chart.
12.4

Choosing User Chart to use in Monitoring Mode

The user chart which is chosen for the monitoring mode is indicated in the UChart field in the status bar. If "UChart"
is red this means that the workstation is currently displaying the user chart for the planning mode. To activate the
monitoring mode and choose a user chart for the monitoring mode, do the following:
12-6
Put cursor here and
roll scrollwheel to
select User Chart in
Monitor mode
User Chart
X
Monitor
DISP
Plan
DISP