Cpa Auto Activation Setting - Furuno FCR-2107 Series Operator's Manual

5. AIS Operation
5.9.3

CPA auto activation setting

You can get automatic activation of a sleeping AIS target when it is within the set CPA limit. The options are OFF,
FILT or ALL.
OFF activates no AIS targets inside the CPA limit
ALL activates all AIS targets inside the CPA limit
FILT activates the AIS targets inside CPA limit that meet conditions set for CPA auto activate.
Select the setting for CPA auto activation as follows
1. Put the cursor on the text "CPA auto act." then left-click to select desired option (OFF, FILT, ALL).
AUTO
MAN
SINGLE
xx.xx xx.xx
2. For FILT, you can set additional conditions for AIS target. Put the cursor on the text "CPA auto act." then right-
click to open the CPA auto activate dialog box.
3. Set desired additional conditions for auto activation of AIS target (sleeping target->active target).
5-12