Storing And Recalling Chart Display Setting For Visible Chart And Navigational Features - Furuno FCR-2107 Series Operator's Manual

7. Vector Chart Material
7.9.6 Storing and recalling chart display setting for visible chart
and navigational features
Chart display settings and Symbol display settings are using common settings, which means that when you select
settings display settings the same file is chosen for symbol settings.
You can define chart display and symbol display settings which are displayed over S57 charts cells. You can save
these chart display settings to your hard disk and recall them whenever you need them.
Creating new chart display settings
To create new settings for chart display, do the following:
Display Chart Display/Info/Standard Display in the mouse functions area and then push the left mouse button.
Move the cursor over the small triangle on the Chart Display or symbol dialog box.
Choose "Save as" from the Chart Display or Symbol Display menu and then push the scrollwheel.
Enter desired name for Chart Display Settings and press OK in dialog box.
Make your changes both Chart Display and Symbol display settings. Note, that you have to select "Save" from the
menu before closing dialog box
Choosing chart display settings
Open the Chart Display or symbol Display dialog box and place the cursor on the triangle.
Choose Select from the menu and push the scrollwheel.
Choose desired chart display settings from the list box.
Saving changes to chart display settings
Open the Chart Display or Symbol Display dialog box and place the cursor on the triangle.
Choose Save from the menu to save current chart display settings.
7-66