Manual Speed Input - Furuno FCR-2107 Series Operator's Manual

2.5.3

Manual speed input

If no automatic speed input is selected or working, enter speed manually as below. In this case the speed data type is
shown as (man).
Manual speed can be set on the SPD/CRS page of SENSORS dialog box.
1. Place the cursor on the Position field in the information area.
2. Push the right button to open the SPD/CRS page.
SPD/CRS POSN
kn
kn
kn
kn
kn
Ref tgt
kn
(CALC)
3. Use the trackball to select Manual speed, and spin the scrollwheel to enter desired speed.
4. Click the Close window button (X) to close the SENSORS dialog box.
Note: The maximum manual speed value that can be entered is set with MAX Speed in the Ship parameters window
in the Ship and Route Parameters dialog box. For details, see section 19.1.3 Navigation parameters setting.
2. Radar Operation
2-11