Danger Target Log - Furuno FCR-2107 Series Operator's Manual

16.2.3

Danger target log

The danger target log stores information about targets which are received from a radar (tracked targets) and/or
targets which are received from an AIS transponder (AIS targets).
If a tracked target or AIS target is within the set CPA and TCPA, information of all tracked targets (including non-
dangerous targets) are recorded into the danger target log. This data is as follows:
•
Date and time, index of target (number of tracked target on Radar or IMO MMSI number from AIS
transponder).
•
CPA and TCPA of both AIS and tracked targets
•
Position (Lat, Lon), speed (Spd) and course (Crs) of both AIS and tracked targets.
•
Heading (Hdg) information of AIS target.
Viewing danger target log
To open the Danger Target log, do the following:
Alert Log
Alert Queue
Use First 1000, Prev 1000, Next 1000 and Last xxx buttons to select desired time to be listed in the log viewer.
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the guidance area
then push the left button.
2. Choose Record from the menu then push the scrollwheel.
3. Choose Danger Target Log from the menu then push the scrollwheel.
4. The following window appears. Confirm that you want to open the log by
clicking the OK button. Otherwise click the Cancel button.
The system will start viewing program of log.
You can print the entire log or a desired part. To change print font size, place
the cursor on the triangle and choose desired font size. To print the log, click the
Print Log button. To print whole log, select Print All from the menu.
CRS/ °
LAT LON SPD/kn
First 1000
HDG/ °
CPA/ TCPA/ Index
Prev 1000
16. Recording Functions
Last 449
16-7