How To Modify An Existing Route; How To Change Waypoint Position - Furuno FCR-21x9-BB Operator's Manual

4. Select the folder that contains the route(s) to be imported then click the [OK] but-
ton.
5. Check the route(s) to import then click the [Import] button.
12.5

How to Modify an Existing Route

12.5.1

How to change waypoint position

To change position of a waypoint you have the following choices:
• Enter latitude and longitude on the [Waypoints] page in the [Route Plan] dialog box.
• Drag and drop waypoint using the left button.
How to drag and drop waypoint to new position
1. Put the cursor on the route waypoint to move then push the right button to show
the context-sensitive menu.
2. Select [Edit].
3. Press and hold down the left button while rolling the trackball to move the cursor
to a desired position. Release the button when the cursor is at the desired position
How to change latitude and longitude from the Waypoints page
1. Show the [Waypoints] page.
2. Put the cursor on the digit to change in the Latitude or Longitude field.
3. Enter position from the Control Unit, or use the scrollwheel.
12. ROUTES
12-9