Displaying Target Data; Basic Data - Furuno FCR-2107 Series Operator's Manual

5.8

Displaying Target Data

You can display an AIS target's data by selecting it on the display.
5.8.1

Basic data

From the control unit w/keyboard
1. Use the trackball to place the cursor on the AIS target symbol you want to know its data.
2. Press the TARGET DATA key.
By trackball
Use the trackball to place the cursor on an AIS target symbol then push the scrollwheel. The selected target is
marked with a broken square and AIS data is shown in the AIS data box when the target is correctly selected.
Activated target selected for data display
AIS data display
Note 1: AIS is switched off in dead reckoning.
Note 2: The indication "Query" appears when receiving only dynamic data: "Tracking"appears after receiving static
data.
5. AIS Operation
5-9