Terminating Tracking Of Targets (Including Reference Targets); Manual Acquisition; Setting Manual Acquisition Conditions - Furuno FCR-2107 Series Operator's Manual

4.5.2

Terminating tracking of targets (including reference targets)

When the TT has acquired the menu-set number of targets automatically, the message "TT Auto acq full" (or "TT
Man acq full)" appears at the right side of the screen and no more auto acquisition occurs unless targets are lost or
manually cancelled. Should this happen, cancel tracking of less important targets or perform manual acquisition.
Canceling individual tracked targets
From the control unit w/keyboard
1. Use the trackball to place the cursor (+) on the TT or reference target to cancel tracking.
2. Push the TARGET CANCEL key.
By trackball
1. With the cursor inside the effective display area, spin the scrollwheel to show Tgt Cancel /L = All in the
guidance area.
2. Use the trackball to place the cursor on the Tracked Target or reference target to cancel tracking.
3. Push the right button to cancel tracking on the target selected.
Canceling tracking on all tracked targets
1. Use the trackball to select the TT ACQ mode box at the right side of the screen then push the right button.
TT TARGET menu
2. Use the scrollwheel to select Cancel All.
3. Push the scrollwheel to cancel tracking on all tracked targets.
4.6

Manual Acquisition

Maximum 100 targets may be acquired manually depending on the acquisition condition set on the TT TGT menu.
Note: Targets cannot be acquired manually using acquisition condition "Auto 100". Also, you cannot acquire targets
automatically in acquisition condition "Manual 100".
4.6.1

Setting manual acquisition conditions

1. Use the trackball to select the TT ACQ mode box at the right side of the screen then push the right button to
show the TT TARGET menu.
TT TARGET menu
2. Spin the scrollwheel to select Manual 100, Auto 25, Auto 50 or Auto 75 as appropriate then push the
scrollwheel.
4. Tracked Target (TT) Operation
4-5