Choosing Final Waypoint; Viewing Waypoint Information - Furuno FCR-2107 Series Operator's Manual

11.3

Choosing Final Waypoint

Normally you use the last waypoint in a monitored route as the final waypoint, and the chart radar automatically
does this when you choose the route to monitor. However, sometimes you can prefer to use some other waypoint as
the final waypoint of a monitored route.
To choose a waypoint as final waypoint, do the following:
1. Open the Monitor Route dialog box; choose Route from the status bar, then click the Monitor button.
2. Place the cursor in the Final WPT box, spin the scrollwheel to choose a waypoint.
3. Push the scrollwheel to confirm your selection.
11.4

Viewing Waypoint Information

You can view waypoint information for the monitored
route by clicking the Waypoints tab in the Monitor
Route dialog box. This information is printed from route
planning information made for this voyage.
"TO WPT" and "NEXT WPT" are indicated on this list.
WPT
WPT
LAT
LON
SPD CSE M
Rad
NAME
Planned ETA (UTC+1)
Speed limit
setting
ETD
ETA
11. Route Monitoring
11-3