A4.6.2 Add License Manually - Furuno FCR-2107 Series Operator's Manual

Appendix 4: C-MAP CM-93/3 Charts

A4.6.2 Add license manually

If you receive license as a "License string", you can enter this string manually into ECDIS. To enter code, proceed
as follows:
Menu -> Chart Menu -> C-MAP Ed3 -> Licenses.
Add string received from C-MAP to the "License string" field then click the Add License button.
Click the License list button to see entered licenses.
Close the "LicenseAdm" dialog box by clicking the X sign in upper right corner.
AP-39