Keyboard Test - Furuno FCR-2107 Series Operator's Manual

22.5

Keyboard Test

In addition to the color calibration tests, the system provides a keyboard test which the operator may use to check
keyboard of the RCU-020. (Other diagnostic tests are also provided, on the self test menu, however these are
intended for service technicians. For further details, see the service manual.)
1. Spin the scrollwheel to show Menu/Info/Chart Menu in the guidance area, then push the left button.
2. Select the Initial Setting menu.
3. Place the cursor on the triangle in the menu to show the Initial Settings menu.
4. Select Self Test. You are asked if it is OK to leave the chart radar mode and start the self test.
SELFTEST
Click OK to leave ECDIS mode
and start Selftest.
OK Cancel
5. Click the OK button to show the self test menu.
22. Maintenance and Troubleshooting
22-11