Menu Operation - Furuno FCR-2107 Series Operator's Manual

1.4

Menu Operation

There are two main menus, radar/chart radar and ECDIS, and the one currently available depends on operating
mode. You can access the main menu from the full keyboard or by using the trackball. In later sections only the
procedure for operation by trackball is given. In the example below the menu operating procedure for operation on
the radar/chart radar main menu is presented.
1. Do one of the following depending on the control unit you are using.
a) Control unit RCU-020: Push the MENU key to show the Main menu.
b) Control unit RCU-015 (or RCU-020): Use the trackball to select the MENU box
of the screen then push the left button to show the Main menu.
Main menu (radar/chart radar)
1. Operational Overview
at the right side
1-5