Using The Menus; Navigating Through The Menus - 3Com 3C63400-3AC-C - PathBuilder S700 Switch Reference Manual

Using the Menus

Navigating through the
Menus
Figure 31 PathBuilder S700 Main Menu
Use the options on the Main menu as follows:
Select [1] System Administration to access common parameters.
n
Select [2] Configuration Management to view or set configuration parameters.
n
Select [3] Fault Management to view or acknowledge alarms and set
n
loopbacks.
Select [4] Performance Management to view statistical data.
n
Select [5] Exit to log out.
n
The title of the menu or display appears at the top of the screen. Your access
status appears in the upper righthand corner.
Read-Write means that you have Read-Write control of the PathBuilder S700
n
and can make changes to the system.
Read Only means that you can only monitor the menus and displays.
n
If you have superuser privileges, you can switch from a Read-Only to a Read-Write
session without logging off. See later in this chapter for details.
You select a menu option by typing the selection number and pressing [Enter].
Displays that contain information and no selections include the prompt:
Press Esc for previous menu
Multi-page displays also prompt you to press "N" for the next page or "P" for the
previous page.
Only the Main menu contains the Exit selection to log out. Selecting Exit returns
you to the title screen with the password prompt. All other menus have a Previous
Menu selection which returns you to the Main menu one screen at a time. You can
also press [Esc] to move back one menu at a time.
Using the Menus 59