Master Mode; Assigning X-10 Devices; Copying Keypad Settings - GE NX-10 Installer Manual

operation.
CAUTION: Batteries can explode or cause burns when recharged, incorrectly (dis)assembled, or exposed to
fire or high temperatures. Dispose of used battery according to battery directive instructions
and/or as required by local laws. Keep away from children.
Only replace the batteries with Energizer or Duracell AA batteries. Do not use a different type of
batteries. Always use batteries that are from the same batch, and always replace all batteries
with fresh ones simultaneously.

Master mode

You can program a keypad to act as a single-partition keypad or a master keypad by default. A
single-partition keypad allows the user to arm one partition only while a master keypad allows the
user to arm one or more partitions. A user with appropriate rights can change a single-partition
keypad to a master keypad and vice versa.
Navigate with the
1.
OK.
•
Select Yes to set the keypad as a master keypad by default.
•
Select No to set the keypad as a single-partition keypad by default.
Press OK to save the setting.
2.
The keypad beeps once to confirm the change and returns to Master Keypad.
3.

Assigning X-10 devices

The keypad can be used to activate selected X-10 devices. The following example programs the unit
code (3) and house code (L) for device 1.
Navigate with the
1.
Control>Device 1 and press OK.
Scroll to Unit Code and press OK.
2.
Select 3 and press OK.
3.
The keypad beeps once to confirm the change and returns to Unit Code.
4.
Scroll to House Code and press OK.
5.
Select L and press OK.
6.
The keypad beeps once to confirm the change and returns to House Code.
7.

Copying keypad settings

The current keypad settings can be copied to one or multiple keypads in the system. The following
example copies the current keypad settings to another keypad in the system.
Navigate with the
1.
OK.
keys to This Keypad>Keypad Features>Master Keypad and press
keys to This Keypad>Keypad Features>Advanced Options>Light
keys to This Keypad>Copy Keypad>To One Keypad and press
NX-10 Installers manual
151