GE NX-10 Installer Manual page 22

8
9
10
11
!
12
13
This icon is only available on the wireless keypad and flashing when the
Battery low
keypad battery is low.
This icon flashes in case of an alarm condition.
Alarm
This icon is only available on the wireless keypad and indicates RF-link
field strength. The one most to the left indicates absence of RF, the one
most to the right indicates full signal strength. It will flash as long as the
keypad is not registered yet.
This icon indicates a system trouble condition, for example, fire trouble,
day zone trouble or AC power loss. You can display the trouble list by
Trouble
pressing the # (hash) button on the keypad (see Appendix 4: Service
messages on page 251.)
This icon is ON in case the system needs to be serviced. It can indicate
many conditions, for example, ground fault, phone fault, fail to
Service
communicate, box tamper, loss of system time, and similar problems. You
can display the service message list by pressing the # (hash) button on the
keypad (see Appendix 4: Service messages on page 251.)
If the system is OK to arm, the V-sign icon is displayed. If it is NOT OK to
arm, the V-sign disappears. In case a force armable zone is open, it will
Ready to arm
show a flashing V-sign (see Table 11 Default zone types, and Force
Armable menu option description in the glossary.)