Auxiliary Panic Alarm; Siren Time-Out; Access Codes; System Master Code - GE Security Pro 500 User Instructions

Access Codes

11
¾
To activate a Police panic alarm using a touchpad:
• Press and hold the Police button(s) for 2 seconds.
¾
To activate a Police panic alarm from a keychain touchpad*:
• Press and hold the Lock and Unlock buttons at the same time for 2 seconds.
* The installer must configure the Police panic alarm to work this way.

Auxiliary Panic Alarm

The Auxiliary panic alarm sounds from interior sirens only. It is typically set up by your security
dealer, based on your specific needs. On monitored systems, the central station responds by call-
ing the service or agency you specified through your dealer.
¾
To activate an Auxiliary panic alarm from a touchpad:
• Press and hold the Auxiliary button(s) for 2 seconds.

Siren Time-out

If the system is not disarmed after an alarm, the sirens will continue to sound until the time-out
period is reached. The time-out period can be programmed only by your installer or dealer.
Even though reaching the end of the time-out period stops the sirens, if your system is monitored,
the central station will consider the alarm in progress until the system is manually disarmed.
The system requires a valid access code before it will process most commands. The Appendix A
User Sheets provide a location for you to record the System Master and User codes.

System Master Code

There is one System Master code. The System Master code is used to enter the programming
menus for your system. The default System Master code is
change the default code and record the new code in the Appendix A User Sheets.
¾
To change the System Master Code:
1. Enter the programming menus by pressing
110
2. Press .
3. Enter the desired 4-digit System Master Code, then press
‚ 4 ƒ
4. Press + + to exit the programming menus.

Regular User Codes

There are 16 Regular User codes which act like keys to arm and disarm the system. If necessary,
they can be assigned to neighbors, baby-sitters, or repair persons for temporary use. Regular user
codes can be changed in the programming menus and are easily deleted from the system when no
longer necessary.
Good User Code Hygiene
To preserve the integrity of your system, keep user codes confidential and delete extra codes as
soon as they are no longer needed.
We recommend that you avoid using obvious code patterns such as
etc.

Using the Programming Menus

Some system settings can be changed by you, the user, while other settings must be changed by
the installer.
To change system settings, you'll use the System Master code to enter a series of programming
menus. Appendix C gives a detailed explanation of how to use the menus or, if desired, how to
use programming shortcuts.
1234
. It is important that you
9
+ the current System Master Code.
ƒ
.
1234
or
1111 2222
, ,
Security Pro 500