GE NX-10 Installer Manual page 157

Hide thumbs Also See for NX-10:
Table of Contents

Advertisement

Location
Term
3.3.13.8.1
Unit Code
3.3.13.8.2
House Code
3.3.13.9
Latch Faults until Viewed
3.3.13.10
Display Contact Central Station
3.3.13.11
KP Shutdown shows Clock
3.3.13.12
KP Shutdown allows Disarm
3.3.13.13
Status LED
3.3.13.14
Status LED Always On
3.3.14
Pry Off Switch
3.3.14.1
Always Tamper
3.3.14.2
Only Arm-away if On the Wall
3.3.15
Battery Compartment Switch
3.3.15.1
Tamper Delayed 30s when
Disarmed
3.4
Function Keys
Definition
A menu option that sets the X-10 unit code used to identify
a particular X-10 device on the selected module.
A menu option that sets the code used to identify a
particular premises. It is necessary in case any
neighbouring premises also has an X-10 home automation
system.
More information on the X-10 home automation system
can be found at www.x-10europe.com.
A menu option that, if enabled, sets the keypad to display
the alarms until they have been viewed.
A menu option that, if enabled, sets the keypad to display
the message Contact Central Station after an alarm has
been reported and the system disarmed.
A menu option that causes the keypad to display the date
and time instead of the "Please Enter Your Code" message.
A menu option that, if enabled, allows a blanked keypad to
be disarmed.
A menu option that, if enabled, turns on the backlighting
for the state indicator (GE logo) on the keypad.
A menu option that, if set to Yes, causes the state indicator
to be on at all times. This option is accessible only on a
wired keypad.
A menu entry that groups the wireless keypad options
related to the pry off switch.
A menu option that turns on the wireless keypad's pry off
switch. It actually fixes the wireless keypad to the wall just
like a wired one, while disabling this option renders the
keypad fully portable within the reach of the RF link.
A menu option that allows to arm the system in Away
mode only if the wireless keypad is on the wall.
A menu entry that groups the wireless keypad options
related to the battery compartment.
A menu option that allows to replace keypad batteries
after a valid user code has been entered. See Battery
replacement on page 148 for the battery replacement
procedure description.
A menu entry that groups all programmable function key
options.
Function keys are dedicated for a particular function as
programmed by the installer. See Programming the
function keys on page 145.
NX-10 Installers manual
157

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents