GE NX-10 Installer Manual page 193

Report type
XSIA over TCP/IP reporting
HomeText Reporting
When HomeText reporting is
enabled, you will receive SMS
text messages about the alarm
system status to your mobile
phone.
Information
Menu Option
required
Destination Select NX-7002 Module>Reporting>Report Control>Report
n>Destination>SMS1 or SMS 2.
Protocol Select NX-7002 Module>Reporting>SMS Reporting>Receiver
n>Protocol.
Select SIA Separate, SIA Combined or SIA Partition Modified.
SMS Service Select NX-7002 Module>Options>GSM>SMS Service Center Address.
Centre
Destination Select NX-7002 Module>Reporting>Report Control>Report
n>Destination>TCP/IP 1 or 2.
IP address Select NX-7002 Module>Reporting>TCP/IP
Reporting>Receivers>Receiver n>IP Address.
Account Code Select NX-7002 Module>Reporting>TCP/IP
Reporting>Receivers>Receiver n>Account Code.
Note:
Receiver Number Select NX-7002 Module>Reporting>TCP/IP
Reporting>Receivers>Receiver n>Receiver Number.
Line Number Select NX-7002 Module>Reporting>TCP/IP
Reporting>Receivers>Receiver n>Line Number.
Enable XSIA Select NX-7002 Module>Reporting>XSIA
Protocol Select NX-7002 Module>Reporting>TCP/IP Reporting>Report
Format>SIA.
Set the keypad Select NX-7002 Module>Options>HomeText>Keypad for Zone Text.
from which zone
and user names
are obtained.
HomeText phone Select NX-7002 Module>Reporting>HomeText>Users>HomeText User
number n>Phone Number.
HomeText system Select NX-7002 Module>Reporting>HomeText>Site Address
location
HomeText Select NX-7002 Module>Reporting>HomeText>Users>HomeText User
language n>Language
HomeText Report Select NX-7002 Module>Reporting>HomeText>Users>HomeText User
groups n>Report Groups
Send Select NX-7002 Module>Options>HomeText>Relay Unrecognised SMS
unrecognised text to Admin.
messages to the
Note:
administrator.
NX-10 Installers manual
XSIA account numbers are 6 digits long.
Phone 1 is the administrator phone.
193