Navigating The Menus; Quick User Menu; Selecting A Menu Option; Changing A Menu Option - GE NX-10 Installer Manual

Navigating the menus

•
Press the
•
Press #
are in a submenu for zone 2, press #
•
Press #
in a submenu for zone 2, press #
Note: The keypad may timeout from the menu system and return to the default display.

Quick User Menu

You can access a limited number of menu options without entering your installer code or user code.
This opens the command menu. Commands available in the Quick User Menu allow, for example, to
quickly preview the alarm memory list, reset detectors or start the service check.
Press OK at the system prompt.
1.
Press the
2.

Selecting a menu option

•
Press OK to select a menu option and move forward in the menu structure.
•
Press NO to reject a menu option and move backwards in the menu structure.
•
Press
time, from right to left.
•
Press
time, from left to right.

Changing a menu option

The NX-10 has several editors that you can use to change the value of certain programmable menu
options. You can change selection list entries, binary entries, phone numbers and text. This section
describes how to change selection list entries, binary entries, numeric entries and phone numbers. For
information on changing text, see Editing text.

Changing selection list entries

Navigate with the
1.
The current value for the menu option is displayed, for example, Enabled.
2.
Press the
3.
Press OK to accept the change.
4.
•
If the new value is valid, the keypad beeps once to confirm the change and returns to
the menu option.
•
If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
keys to scroll through menu lists and options.
to move to the same menu item for the previous option. For example, if you
to move to the same menu item for the next option. For example, if you are
keys to enter and navigate the Quick User menu.
(F4) to move through the second line of the LCD display, one word at a
(F5) to move through the second line of the LCD display, one word at a
keys to the relevant menu option and press OK.
keys to change the value, for example, change Enabled to Disabled.
to move to the same submenu for zone 1.
to move to the same submenu for zone 3.