Download Print this page

Chime Mode; Keypad Adjustments - GE Simon XT Quick User Manual

Security systems ge
Hide thumbs Also See for Simon XT:

Advertisement

Keypad Panic Button
Press and hold MEDICAL button (cross) for 2 seconds. Keypad will start beeping. If monitored,
emergency service will be sent. Enter code to stop siren when emergency is over.
Press and hold POLICE button (badge) for 2 seconds. Siren will sound. If monitored, emergency
service will be sent. Enter code to stop siren when emergency is over.
Press and hold FIRE button (flame) for 2 seconds. Siren will sound. If monitored, emergency service
will be sent. Enter code to stop siren when emergency is over.

Chime Mode

Your system can alert you to the opening of a door while it is disarmed by using the Chime feature.
When activated, two beeps will sound at the keypad whenever a door or window is opened.
1. To enable or disable the Chime feature, scroll up or down until the display shows Chime.
2. Press OK button.
3. Display will flash Chime On if turned on or Chime Off if turned off.

Keypad Adjustments

Contrast Adjustment
1. Scroll up/down until the display shows Contrast.
2. Press OK.
3. Scroll up/down to increase and decrease the contrast setting.
4. Press STATUS to save the setting and exit.
Status Beeps Volume
1. Press OK to enter the System Menu.
2. Scroll up/down to System Programming and then press OK.
3. The panel will display ENTER CODE, enter code and press OK.
4. Scroll up/down to Siren Options, press OK.
5. Scroll up/down to Status Beep Vol., press OK.
6. The current value of this option will now flash. (1-10)
7. Scroll up/down to the desired level and press OK.
8. Press STATUS three times to exit.
Battery Replacement
1. Unplug unit from outlet.
2. Using a Phillips screwdriver, unscrew the small screw on the top of the unit.
3. Depress the 2 small tabs on top of the console, and pull towards you to open.
4. While letting the face hang down, slightly pull apart the tabs holding the battery in place.
5. Remove the battery, and observing correct polarity, replace.
6. Replace cover.
7. Plug unit back into outlet.
8. Press STATUS button
GE Simon XT Quick User Guide
(not available on all keypads)
Page 4

Hide quick links:

Advertisement

loading