Reporting Summary - GE NX-10 Installer Manual

connection type and must be done before the phone number and IP address can be
programmed.
Navigate with the
2.
OK.
Press # to clear the current value.
3.
Enter the IP Address and press OK.
4.
Navigate with the
5.
Port and press OK
Select the U/D port and press OK.
6.

Reporting summary

The following table summarises the programming information required for different types of
reporting.
Table 21. Reporting Summary
Report type
Contact ID over SMS
SIA over SMS
XSIA over SMS
keys to NX-7002 Module>Up/Download>IP Address and press
keys to NX-7002 Module>Options>Network>Port Numbers>U/D
Information Menu Option
required
Phone Number Select NX-7002 Module>Reporting>SMS Reporting>Receiver n>Phone
number.
Account code Select NX-7002 Module>Reporting>SMS Reporting>Receiver n>Account
Code.
Protocol Select NX-7002 Module>Reporting>SMS Reporting>Receiver
n>Protocol>Contact ID.
Destination Select NX-7002 Module>Reporting>Report Control>Report
n>Destination>SMS1 or SMS 2.
SMS Service Select NX-7002 Module>Options>GSM>SMS Service Center Address.
Centre
Phone Number Select NX-7002 Module>Reporting>SMS Reporting>Receiver n>Phone
number.
Account code Select NX-7002 Module>Reporting>SMS Reporting>Receiver n>Account
Code.
Protocol Select NX-7002 Module>Reporting>SMS Reporting>Receiver
n>Protocol.
Select SIA Separate, SIA Combined or SIA Partition Modified.
Destination Select NX-7002 Module>Reporting>Report Control>Report
n>Destination>SMS1 or SMS 2.
SMS Service Select NX-7002 Module>Options>GSM>SMS Service Center Address.
Centre
Phone Number Select NX-7002 Module>Reporting>SMS Reporting>Receiver n>Phone
number.
Account code Select NX-7002 Module>Reporting>SMS Reporting>Receiver n>Account
Code.
Enable XSIA Select NX-7002 Module>Reporting>XSIA