GE NX-10 Installer Manual page 111

111
NX-10 Installers manual
Segment 2 contains the ones digit of the "Bell Tamper Reporting". Segment 3 contains the tens digit
of the "Bell Tamper Restore". Segment 4 contains the ones digit of the "Bell Tamper Restore".
For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.
LOCATION 72 - TELEPHONE LINE CUT RESTORE COMMUNICATOR CODES, SLOW SPEED
FORMATS ONLY (4 segments, numerical data)
Location 72 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if "Telephone
Line Cut Restore Reporting" is enabled. Segment 1 and segment 2 are reserved. Segment 3 contains
the tens digit of the "Telephone Line Cut Restore". Segment 4 contains the ones digit of the
"Telephone Line Cut Restore".
For a 3+1 format, only the segment 3 digit (tens) will be sent.
LOCATION 73 - Reserved
LOCATION 74 - EXPANDER TROUBLE AND EXPANDER TROUBLE RESTORE COMMUNICATOR
CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)
Location 74 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if "Expander
Trouble Reporting" is enabled. Segment 1 contains the tens digit of the "Expander Trouble
Reporting". Segment 2 contains the ones digit of the "Expander Trouble Reporting". Segment 3
contains the tens digit of the "Expander Trouble Restore". Segment 4 contains the ones digit of the
"Expander Trouble Restore".
For a 3+1 format, only the segment 1 digit resp. segment 3 digit (tens) will be sent.
LOCATION 75 - FAIL TO COMMUNICATE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
(2 segments, numerical data)
Location 75 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if the "Fail
To Communicate Reporting" is enabled. Segment 1 contains the tens digit, and segment 2 contains
the ones digit.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
LOCATION 76 - LOG FULL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,
numerical data)
Location 76 contains the tens and ones digits for a 4+2 and 3+1 format if the "Log Full Reporting" is
enabled. Segment 1 contains the tens digit, and segment 2 contains the ones digit.