Chapter B4 Programming The Other Keypads; Chapter B5 Setting Up The Rf Receivers - GE NX-10 Installer Manual

Chapter B4
Figure 22. Other keypads menu
(1) Partition 1
4.1
Partitions 2 - 4
Same as above
This menu branch is obsolete in the NX-10 system. It gets displayed for older systems only.
To program other keypads, select Installer Menu>Other Keypads and select the partition containing
the keypad. You can view the keypad version and model and default the selected keypad.
Glossary
Location Term
4 Other keypads
4.1.1.1 Model
4.1.1.2 Version
Programming the other
keypads
Keypad 1
4.1.1
Keypads 2 - 4
Same as above
Definition
A menu entry that groups programming options for other
keypads in the system.
A menu option that displays the current model of the
selected keypad.
A menu option that displays the current software version of
the selected keypad.
Model
4.1.1.1
Version
4.1.1.2
Reset Settings
4.1.1.3
NX-10 Installers manual
161