Configuring The Printout - Sartorius Factory Series Operating Instructions Manual

Configuring the Printout

(Config)
Purpose
You can configure individual printout
formats for each application.
With the formulation, totalizing and
statistics application, you can also
define the values to be printed on
the total printout when the MR key
is pressed.
In the Setup menu you can configure
individual, component or total
data records that contain the items
available for printouts in each
application. Configure these records
after you have configured the
applications, because some entries
in the data record are application-
dependent.
Features
– Maximum items in a data record:
60
– Individual, component and
total records can be configured
separately
– Output individual record:
Press p
Automatic printout of application
data:
Results from animal weighing or
density application (Setup:
Application 1: Density: Printout:
All data)
OK values from checkweighing
application, time-controlled
printouts, 2nd tare memory data
– Output component printout:
Totalizing, formulation or statistics
by pressing M+ or M-(Setup:
Application 3: ..., Printout
components: On)
– Output total record:
For totalizing, formulation or
statistics by pressing MR
– Data records are deleted after
an application or an extra function
is activated or ended in the
application menu
– A new pick list is created based
on the currently active application
programs and extra functions
– Printout items can be deleted
individually
– No printout is generated when the
following settings are configured:
Menu: Print in weighing mode:
automatic
(6 – 1 – 4, 6 – 1 – 5, 6 – 1 – 6)
Application: Printout configuration:
Line format: For raw data
(16 characters)
– Form feed:
Select the "YDP02 IS- label" print
mode (menu code 5 – 5 – 11) to
configure automatic form feed to
the beginning of the next label
Configuring the Scale: FC
Additional Functions
§ Save settings and exit printout con-
figuration: Press soft key oo
> Start application
§ Print parameter settings:
– When the select bar is on List
or Select: Press p
> Printout (example)
--------
Date/time
S ID
Ref. weight
Piece count
Minimum
Nom.no.weighs
etc.
29