Sartorius Factory Series Operating Instructions Manual page 108

View and Print Display Pages
You can use the manual mode to
print display pages (for lots, samples,
values and results).
To view and print a display page
for values:
Show the display page for lots:
press the soft key
Lot
Show the display page for samples:
press the soft key
Sample
Show the display page for values:
press the soft key
Values
Print the display page for values:
press p
PRINT: Lot: CH0001 Smpl:1
Current sample
All samples (5)
oo o Q
$ Select amount of data to be
included on the printout: press
the or soft key
q Q
Confirm print command: press
the soft key
l
The display pages for lots and
samples can be printed when they
are shown on the scale display.
View the Display Page for Results:
Show the display page for lots:
press the soft key
Lot
Show the display page for sam-
ples: press the
Sample
Show the display page for values:
press the soft key
Values
Show the display page for results:
press the soft key
Result
Print the display page for results:
see instructions for printing the
display page for values
You can manually print the display
page for statistics when it is shown
on the scale
To view the display page for statistics:
Select statistics: press the
soft key
$ For samples each with a different
number of backweights:
Select the kind of statistics:
press the or soft key
q Q
$ Confirm selection: press the
soft key
l
108
Deleting or Omitting a Lot or Sample
Lots can be deleted; samples can be
deleted or omitted.
You can choose between
– deleting the current lot and
– deleting all lots.
You can choose whether
– the active sample is deleted entirely,
or
– only the values from the active
sample are deleted, or
– all samples are deleted completely,
or
– only the values from all samples are
deleted, or
– a sample is omitted.
Deleting a Lot/Sample
Activate the display page for
q l
lots/samples
Select the desired lot/sample
Select the "Delete" function: Press
the
Delete
Define the lot(s)/sample(s) to be
deleted and confirm
Select "Yes" to complete the delete
function or "No" to cancel it
soft key
Example: Deleting all samples
completely (in this case, 3 samples)
Omit or Include Sample
Activate the display page for
samples
Select the desired (or omitted)
sample
Delete: Press the
Omit: Press the
Stat.
Example: Sample 3 has been omitted
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric
input), and
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
Press the
> See the section entitled "Calibrati-
on/Adjustment" for further instruc-
tions
Setup (Parameter Settings)
Press the M key
> See the chapter entitled "Configu-
ring the Scale" for further instruc-
tions
key
Turning Off the Scale
Press the e key
> The scale shuts off
> The display goes blank, then OFF
or Standby is displayed with
backlighting
key
Delete
key
Omit
soft key
isoTST