Sartorius Factory Series Operating Instructions Manual page 161

2nd Tare Memory/Identifier
Printout shows either
– Net value N1,
– Tare weight T1, or
– Manually entered tare value PT1
Up to 4 identifier lines can be
included on the printout
ISO/GMP-compliant Printout/Record
You can have the parameters pertain-
ing to weighing conditions printed
before (GMP header) and after
(GMP footer) the values from the
weighing series. These parameters
include:
– Date
– Time at the beginning
of a weighing series
– Scale manufacturer
– Scale model
– Model serial number
– Software version
– Lot number (weighing series no.)
– Time at the conclusion of the
weighing series
– Field for operator signature
Operating the Scale with an
ISO/GMP-capable Documentation
Device (Printer)
ISO/GMP-compliant documentation
requires a computer with special
software. Contact Sartorius for
a detailed description for creating
this software.
Setting:
Setup... Printout configuration:
ISO/GLP/ GMP printout: Always
The record is output to a Sartorius
printer or a computer.
End GMP printout:
§ Press c
End GMP printout while application
is active:
This requires the following settings:
Setup: ... Keypad: CF function in
application: Clear only selected
applications
§ Press c
> Text line: CF selected:
clear application
§ Press the soft key
GLP
N1 63.48 g
T1 138.73 g
PT1 150.00 g
ID1 Batch no. 1234
ID2 Eisenmeier GmbH
ID3 Screws: M4x6
ID4 Mr. Smith
--------------------
17.01.1997 16:12
SARTORIUS
Mod. FC6CCE-HX
Ser. no. 70419914
Ver. no. 01-35-16
ID 12345678901234
--------------------
L ID 12345678901234
nRef 10 pcs
wRef 1.35274 g
Qnt + 235 pcs
Qnt + 4721 pcs
S ID 12345678901234
Qnt + 567 pcs
--------------------
17.01.1997 16:13
Name:
--------------------
--------------------
17.01.1997 16:24
SARTORIUS
Mod. FC6CCE-HX
Ser. no. 70419914
Ver. no. 01-35-16
ID
--------------------
L ID
Internal calibration
Start: manual
Diff. + 0.006 g
Internal calibration
completed
Diff. + 0.000 g
--------------------
17.01.1997 16:25
Name:
--------------------
Operating the Scale
Net val. with data in 2nd tare memory
Tare weight
Manually entered tare weight
Identifier 1
Identifier 2
Identifier 3
Identifier 4
Dotted line
Date/time
Scale manufacturer
Scale model
Scale serial number
Software vers. (display and control unit)
Scale ID no.
Dotted line
Weighing series no.
Application initialization value
Application initialization value
Counting result
Counting result
ID for counting result
Counting result
Dotted line
Date/time
Field for operator signature
Blank line
Dotted line
Record of Internal
Calibration/Adjustment:
Dotted line
Date/time
Scale manufacturer
Scale model
Scale serial number
Software vers. (display and control unit)
Scale ID no.
Dotted line
Weighing series no.
Calibration/adjustment mode
Beginning mode for
calibration/adjustment
Difference after calibration/adjustment
Confirmation of completed
calibration/adjustment routine
Difference between current and target
values after calibration
Dotted line
Date/time
Field for operator signature
Blank line
Dotted line
161