Product Data Memory - Sartorius Factory Series Operating Instructions Manual

Product Data Memory

Purpose
With this function you can enter, store
and load data records for
initialization of applications, including
user-defined data.
You can use this function in
combination with a program from
Application 1 (e.g., counting,
weighing in percent), one from
Application 2 (checkweighing, time-
controlled functions) and extra
functions F4 and F5 (identifiers,
second tare memory).
Available Features
– Store up to 300 data records.
– Data records can be created,
stored or deleted individually.
– Press the soft key to
ProDat
display data records.
– Define a name for each data
record of up to 15 alphanumeric
characters; the desired location is
displayed in the product data
memory.
– Optional configuration in the
Setup menu to delete a single
character when entering a data
record name by pressing c.
Setup: ... Keypad: CF function for
input: Delete last character.
– Data records are displayed in
alphabetical order.
– Initialization data set for an
application (e.g., wRef, nRef)
is saved when you select
the Store option. This data is
loaded from the product data
memory when you access this
memory from the corresponding
application.
– Use alphanumeric input to search
for and display individual data
records.
– You can assign this function to
the fourth or fifth soft key (from the
right), i.e. F4 or F5.
– Error messages are displayed in
the text line in plain English.
– Press the soft key to
Delete
delete a data record.
Loading Stored Data:
Data for the block printout is stored
in battery-backed memory. The first
time you put the scale into operation,
it must remain connected to power for
a full day. This data remains in
memory for approx. 3 months after
the equipment is disconnected from
AC power.
Operating the Scale
Factory Settings
No user-definable parameters.
Soft Key Functions
Toggle to data record
ProDat
display
Delete selected data
Delete
record
Overwrite the initialization
Load
data with the selected
data record
Change the data in the
Change
stored data record
Create a new data record
New
(after entering a data
record name).
Store the current
Store
application data under
the selected data record
name. If data already
exist for this data record,
a prompt asks whether
this data should be
overwritten.
Answer no to cancel
No
a "delete" or "overwrite"
operation
Answer yes to perform
Yes
the "delete" or "overwrite"
operation
143